J-PLASTA skim coating is a special for-mulated high grade wall skim coating mate-rial that upgrades
J-PLASTA skim coating is a special for-mulated high grade wall skim coating mate-rial that upgrades the quality of wall surface finishing. It gives a smooth and almost per-fect white along with superior filling proper-ties. Its composition consists of selected grade of finely crushed white marble, modi-fied with organic and inorganic binders.
It is most suitable for skim coating of internal concrete walls, ceiling soffits, precast or cast-in-situ concrete panels hollow block walls, correcting imperfect cement and sand plas-tered walls before painting, resurfacing of old walls and old ceiling soffits and also to cor-rect concrete surface imperfections.
1) Excellent adhesion and flexibility en-ables it to withstand minor local tresses without any sign of cracking.
2)Economical to use due to its easiness and time-saving in mixing procedures and superb workability.
3) Easy to apply.
4) Non-combustible thus providing a posi-tive 5) advantage in fire protection.
METHOD OF APPLICATION
The substrate must be clean, free of dust or oil and raw shuttering concrete surface and concrete laitance should be removed either by scraping or sanding before receiving J-PLASTA.
J-PLASTA is mixer with water at a ratio of 30% with a paddle mixer until a smooth, creamy, lump free consistency is obtained.
The mixed J-PLASTA is then sprayed onto the prepared surface using a special spraying machine. The sprayed coat is levelled off to a smooth surface with a spatula.